Clean Booth for Cleanroom Work Areas

short description:

▣AILV clean booths combine a frame, enclosure boundary and selected overhead air components around a local working area. Review the footprint, access and material configuration with the process; agree environmental criteria and checks for the chosen installation.


Product Specification

Product Tags

Factory Show

Detail

▣

AILV / Process Equipment

A clean booth brings a local working area into a defined enclosure and overhead arrangement. Its frame, boundary and selected air components shape the usable space.

Clean booth with panel enclosure and viewing windows
▥

Frame and enclosure construction

The actual frame construction, enclosure material and ceiling arrangement identify the booth. Door or access provisions and the selected air components complete the configuration.

↔

Process space and access

Place the process equipment and operating space within the available enclosure. The required environmental conditions and corresponding checks should describe the selected booth and its use.

Portable Softwall Clean Booth

A modular softwall cleanroom creates a local filtered-air workspace with a frame, overhead fan-filter units and configurable screens. Choose the enclosure and access to suit your equipment, process and site.

Portable softwall clean booth with overhead fan-filter units

Configure Your Booth

Choose the frame, transparent screens or acrylic panels, entrance, FFUs, lighting and controls for your work area. Fixed feet or optional casters can be discussed for the selected size and relocation route.

Can an AILV Softwall Cleanroom Be Moved or Reconfigured?

AILV offers a configurable softwall booth with perimeter screens, overhead fan-filter units and optional casters for suitable layouts. Before selecting a mobile configuration, check floor conditions, doorway clearances, the travel route and service disconnection and reconnection. After a move or layout change, repeat the environmental checks agreed for the new setup. See AILV portable softwall cleanrooms

What Cleanliness Class Should Be Specified?

Agree the required classification, test state and acceptance method for the selected installation and process.

Softwall cleanroom pricing depends on size, screen material, fan-filter configuration and mobility options. For a quote, send the footprint, clear height, process, power supply and target conditions.

Discuss Your Clean Booth →   Explore Hardwall Modular Cleanrooms →

Detailed Product Description

Construction options

Confirm the chosen wall, frame and ceiling materials together. The clean-class entry below is a specification reference to review for the selected project.

Wall material: Organic glass/ Anti-static grid curtain.

Frameworks: Epoxy powder coated steel / Stainless steel square pipe / Extruded aluminum

Ceiling material: Stainless steel / Cold-rolled steel with powder coated / Anti-static grid curtain / Anti-static acrylic board

Clean class:  ISO 5 – 8

Supply and lower-perimeter exhaust

The described arrangement places the fan cabinet on an aluminum-profile support, with the enclosure sealed around the overhead assembly. The surrounding anti-static curtain or plexiglass boundary allows air to leave at the lower perimeter by positive pressure natural exhaust. Review that exhaust path and the access openings with the chosen enclosure.

Project criteria to confirm

Historical document notation: 100-300000 level. Confirm the classification basis, measurement method and acceptance conditions against the project specification. The retained ISO 5–8 entry and this older notation are references to check for the selected enclosure and air-system arrangement.

FEATURES

▣

An enclosure around the activity

Identify the equipment and operator positions before confirming the boundary and overhead arrangement. The working area, access openings and selected air components are coordinated as parts of the same booth configuration.

▥

Single or combined layouts

Specify one enclosure or a grouped arrangement around related work positions. In a combined layout, identify the connections, access openings and air components for each area before confirming the complete assembly.

↔

Module interfaces and changes

Changes begin with the approved frame and enclosure details. Review adjoining modules, overhead components and utility connections together when considering an extension or a revised workstation layout.

⇄

Mobility selected explicitly

Where movement is required, identify the selected base or caster arrangement and confirm the route, connection points and installation location. Specify mobility as part of the ordered configuration and its installation plan.

Clean Booth FAQs

What information is needed to quote a clean booth?

Share the usable footprint and height, equipment and operator positions, access requirements and intended room conditions. Confirm the frame, boundary material and air component configuration with the supplier.

Can a clean booth be moved or reconfigured?

Mobility depends on the ordered frame, base or caster arrangement, connections and site route. Discuss relocation and checks after reinstallation before selecting the configuration.

How is the required filtration selected?

Filtration and airflow are selected for the activity, target conditions, booth layout and applicable project requirements. Confirm the equipment specification and agreed acceptance checks for the selected installation.

Can a booth be extended later?

Possible changes depend on the selected frame and enclosure interfaces, overhead components and service connections. Review the approved configuration before planning an extension.

Specifications

Non-standard customization


  • Previous:
  • Next: