Cleanroom HEPA Exhaust Box

short description:

AILV exhaust HEPA box selection connects the housing and filter to your exhaust duct, service route and specified monitoring or test points.

Ask for best price

Product Specification

Order Scope

Product Tags

Factory Show

Filter housing with a perforated grille and upper access panel.

AILV MATERIALS · EXHAUST AIR

Make the exhaust-side service route clear

An exhaust HEPA box joins the filter housing to the exhaust duct. The drawing should identify the duct flange, filter access and any monitoring or test connections required for the selected assembly.

Published Unit Details

Air tightness of box body	0.1% chamber volume at + 1000 and-1000Pa
Box resistance to pressure	≥2500Pa
filter efficiency	≥99.995%@MPPS
Filter pickup mode	In-situ manual / automatic scanning for leak collection;
Deal with air volume	240m³ / h-2000m³ / h (according to different models);
Resistance detection method	Real-time monitoring of mechanical type differential pressure meter or variable type differential pressure sensor
Disinfection method of the filter	Can be sterilized in situ
resistance to corrosion	Made of high quality stainless steel, inside and outside full welding disinfectant, detergent and acid, alkali

Dimensions & Connections

High efficiency particulate air filter	Air volume (0.9 m/s)	Box size	The wind flange
High efficiency particulate air filter	Air volume (0.9 m/s)	Box size	circular	rectangle
HxWxD	CHM	HxWxD	ΦD	AxB
305X305X93	300	735X465X450(+60)	150	200X150
610X305X93	600	735X770X450(+60)	200	200X200
610X530X93	1000	1040X690X450(+60)	250	320X200
610X610X93	1250	1040X770X450(+60)	300	320X250
610X762X93	1500	1040x922X450(+60)	300	320X320
610X762X117	2000	1040X922X470(+60)	350	400X320

● Box body material: 2.0mm304 stainless steel;

● Including: disinfection mouth, PAO injection and detection port, automatic / manual scanning system, filter resistance monitoring system

● Air volume: 240m'/ h-2000m / h (according to different models)

● Filter: High-efficiency filter

● Seal method: dry gasket seal.

Note:

(1) Installation and opening dimension W1 + 10) (D1 + 10)

(2) The "+ 60" is the height of the inlet air flange

Order Preparation

Locate the service side

Place the filter access door and maintenance area on the duct layout. Avoid arranging adjacent equipment where it obstructs inspection or the planned filter removal route.

List the specified connections

Identify the flange form and any required test, scanning or monitoring points. Tie those items to the selected housing reference rather than treating them as a generic package.

Define the exhaust application

Describe the exhaust process and the documents your team needs for acceptance. Keep these requirements with the housing and filter schedule when comparing the proposed assembly.

Previous: Primary Efficiency Air Filter

Next: Static Pass Box-SPB

▤ Include the selected exhaust housing and filter references, duct connection, access-door orientation and quantities. List any required monitoring or test connections in the proposed supply package.